Specifications — System 5cr Plus Switcher
Video
Gain ............................................... Unity
Bandwidth .................................... 250 MHz (-3dB)
Frequency response..................... < 0.1dB @ 30 MHz
Differential phase error .............. 0.01º, 0 to 10 MHz
Differential gain error ................. 0.01%%, 0 to 10 MHz
Crosstalk ....................................... -50dB @ 5 MHz
Video input
Number/signal type ................... 2 RGBHV/RGBS/RGsB computer video
1 RGBHV/RGBS/RGsB computer video or S-video or composite video
2 S-video or composite video
Connectors .................................... 1 15-pin HD female (RGB computer video)
2 x 5 BNC female (RGB computer video; RGB/S-video/composite video)
2 x 2 BNC female (S-video or composite video)
Minimum/maximum levels ...... Analog ....... 0.3Vto 2V p-p with no offset
Impedance .................................... 75 ohms
Horizontal frequency .................. 15 kHz to 150 kHz
Vertical frequency ....................... 30 Hz to 150 Hz
Return loss .................................... -45dB @ 5 MHz
Maximum DC offset .................... 1.5V
Video output
Number/signal type ................... 1 RGBHV/RGBS/RGsB, or
1 S-video, or
1 composite video
Connectors .................................... 1 x 5 BNC female (RGB computer video)
1 x 2 BNC female (S-video
1 x 1 BNC female (composite video)
Minimum/maximum levels ...... 0.3V to 2.0V p-p
Impedance .................................... 75 ohms
Return loss .................................... -38dB @ 5 MHz
DC offset ....................................... 5mV maximumwith input at 0 offset
Switching type ............................. Triple-Action
Sync
Input type ..................................... RGBHV, RGBS, RGsB
Output type .................................. RGBHV, RGBS, RGsB
Standards ...................................... TTL (RGB), NTSC and PAL (S-video and composite video)
Input level ..................................... 0.5V to 5V p-p
Output level.................................. 0.5V to 5V p-p
Input impedance.......................... 75 ohms
Output impedance ...................... 75 ohms
Max input voltage ....................... 5V p-p
Max. propagation delay.............. 20 nS
Polarity .......................................... Positive or negative (follows input)
Audio
Gain ............................................... Unbalanced/balanced -78dB to +40dB
Frequency response..................... 20 Hz to 20 kHz, 0.05dB
THD + Noise ................................ <0.1% @ 1 kHz at rated maximum output drive
S/N ................................................ >95dB, at rated maximum ourput drive
Crosstalk ....................................... <-80dB @ 1 kHz, fully loaded
Stereo channel separation .......... >90dB @ 1 kHz
CMRR ............................................ >75dB @ 20 Hz to 20 kHz
1-2
System 5cr Plus • Specifications
Specifications — System 5cr Plus (continued)
Vibration ....................................... ISTA/NSTA 1A in carton (International Safe Transit Association)
Listings .......................................... UL, CUL
Certifications ................................ CE
MTBF ............................................. 30,000 hours
Warranty ....................................... 3 years parts and labor
Specifications are subject to change without notice.
(7.32-111501-D1)
1-4
System 5cr Plus • Specifications
|
Euro Pro Carpet Cleaner SC926H User Manual
FoodSaver Food Saver Vac 1500 User Manual
Fostex Computer Drive CD 1A User Manual
Frigidaire Washer 131842800 User Manual
Fujitsu Laptop RX200 S5 User Manual
Fujitsu Network Card FMW43VA1 User Manual
Fujitsu Photo Scanner fi 5650 User Manual
GE Microwave Oven ZSC2200N User Manual
Gemini Musical Instrument PMX 1100 User Manual
GE Monogram Dishwasher ZBD0700 User Manual